CLC-Technik von WT-Direct GmbH
Verspiegelung mit Wassertransferdruck  Kombin
Verspiegelung eingefärbt WTD
Felgen Wassertransferdruck
Titanium mit Wassertransferdruck
WT-Direct GmbH Wassertransferdruck
Gross Skull Design water transfer printing starter set

Item number: SET-Skull-Design-Gross

Category: Starterset Gross

Design selection
Width in cm

starting from 80,00 €

Excluding 16% VAT. , plus shipping

(#brutto_netto_anzeige_brutto#: 92,80 €)
Available now!

There are variations of this item. Please select the variation you wish.

WT-DIRECT Einteiger Set Gross Skull Design for water transfer printing Contents: 1 x activator 1 x spray can lacquer 1 x primer 1 x 2 K clear lacquer 1 x WTD film 5 meters 1 x cutter knife 1 x work instructions 1 x sanding fleece 1 x gloves

Processing information:
The water in the pool should have a temperature of 25 - 27 ° C, the soaking time is 60 seconds, there are 2 variants before the film is placed in the water:
1. Cut around with cuts at an angle of 45 ° at a distance of 2-3 cm. At the end of the soaking time of 60 seconds, the film is sprayed with activator, and the components must be immersed in a timely manner Do not share them from ABS plasticexist required.
Product description:
The water transfer printing film is ideal for providing complex parts with a decor / pattern, easy and easy to learn, even without a dipper / machine a coating is possible TOP QUALITY from WT-DIRECT GmbH if you want to order larger quantities simply the number of meters you need in Increase order window.
The film may look different in the original than in the photo in our shop. A result like the one in the photo can only be achieved if the part to be machined has been pre-painted in the correct RAL color. Our foils / films are wound on rollsfor parts that need to be painted, use our basecoat, otherwise there will be liability problems
Average product review

Write your first review and help others with their purchase decision:

Question on item

Other customers have also bought the following items
Carbon black SM design PI-002 in 50 cm width
3,80 € (from 100 pcs.) *
3,80 € per 1 m
(#brutto_netto_anzeige_brutto#: 4,41 € (from 100 pcs.), 4,41 € per 1 m)
Rivet plate design PI-014 in 50 cm width
3,80 € (from 100 pcs.) *
3,80 € per 1 m
(#brutto_netto_anzeige_brutto#: 4,41 € (from 100 pcs.), 4,41 € per 1 m)
Carbon Coarse Black I-200-1 in 50 cm width
3,80 € (from 100 pcs.) *
3,80 € per 1 m
(#brutto_netto_anzeige_brutto#: 4,41 € (from 100 pcs.), 4,41 € per 1 m)