CLC-Technik von WT-Direct GmbH
Verspiegelung mit Wassertransferdruck  Kombin
Verspiegelung eingefärbt WTD
Wassertransferdruck
Felgen Wassertransferdruck
Titanium mit Wassertransferdruck
WT-Direct GmbH Wassertransferdruck
Moon rock structure WT-1722A

Item number: WT-1722A

Category: Stein Design Optik

width

10,50 €

Excluding 16% VAT. , plus shipping

(#brutto_netto_anzeige_brutto#: 12,18 €)
Available now!

There are variations of this item. Please select the variation you wish.


Processing instructions for moon rock structure WT-1722A: The water in the pool should have a temperature of 25 - 27 ° C, the soaking time is 60 seconds, there are 2 variants before the film is placed in the water and is cut all around with cuts at an angle of 45 ° Cut in by 2-3 cm at the end of the soaking time of 60 seconds, the film is sprayed with activator, and the components must be immersed in a timely manner. The pre-painting or priming is required for all parts that are not made of ABS plastic.

Product description for moon rock structure WT-1722A:
The water transfer printing film is ideal for complex parts with a decor/ Providing samples is easy and easy to learn even without a dipper / a coating is possible TOP QUALITY from WT-DIRECT GmbH if you want to order larger quantities simply increase the number of meters you need in the order window.

NOTE for moon rock structure WT-1722A:
The film may look different in the original than in the photo in our shop. A result like the one in the photo can only be achieved if the part to be processed has been pre-coated in the correct RAL color. Our foils / films are wound on rolls. We recommend using our base lacquer for parts that need to be painted, otherwise liability problems arise can.

Processing instructions for moon rock structure WT-1722A: The water in the pool should have a temperature of 25 - 27 ° C, the soaking time is 60 seconds, there are 2 variants before the film is placed in the water and is cut all around with cuts at an angle of 45 ° Cut in by 2-3 cm at the end of the soaking time of 60 seconds, the film is sprayed with activator, and the components must be immersed in a timely manner. The pre-painting or priming is required for all parts that are not made of ABS plastic.

Product description for moon rock structure WT-1722A:
The water transfer printing film is ideal for providing complex parts with a decor / pattern. Easy and easy to learn, even without a dipper / machine a coating is possible. TOP QUALITY from WT-DIRECT GmbH if you order larger quantities just want to increase the number of meters you need in the order window.

NOTE for moon rock structure WT-1722A:
The film may look different in the original than in the photo in our shop. A result like the one in the photo can only be achieved if the part to be processed has been pre-coated in the correct RAL color. Our foils / films are wound on rolls. We recommend using our base lacquer for parts that need to be painted, otherwise liability problems arise can.

Average product review

Write your first review and help others with their purchase decision:

Contact
Question on item