for water transfer printing Contents: 1 x activator 1 x spray can lacquer
1 x primer 1 x 2 K clear coat 1 x WTD film 5 meters 1 x cutter knife
1 x work instruction 1 x sanding fleece 1 x gloves
The water in the pool should have a temperature of 25 - 27 ° C, the soaking time is 60 seconds, there are 2 variants before the film is placed in the water:
1. Cut around with cuts at an angle of 45 ° at a distance of 2-3 cm. At the end of the soaking time of 60 seconds, the film is madesprayed with activator, and the components must be immersed promptly. The pre-painting or priming is required for all parts that are not made of ABS plastic.
The water transfer printing film is ideal for providing complex parts with a decor / pattern, easy and easy to learn, even without a dipper / machine a coating is possible TOP QUALITY from WT-DIRECT GmbH if you want to order larger quantities simply the number of meters you need in Increase order window.
The film may look different in the original than in the photo in our shop. A result like in the photo iscan only be achieved if the part to be machined has been pre-painted in the correct RAL color. Our foils / films are wound up on rolls