CLC-Technik von WT-Direct GmbH
Verspiegelung mit Wassertransferdruck  Kombin
Verspiegelung eingefärbt WTD
Wassertransferdruck
Felgen Wassertransferdruck
Titanium mit Wassertransferdruck
WT-Direct GmbH Wassertransferdruck
Water transfer printing starter set Gross Tier Design

Item number: SET-Tier-Design-Gross

Category: Starterset Gross

Design selection
Width in cm

starting from 80,00 €

Excluding 16% VAT. , plus shipping

(#brutto_netto_anzeige_brutto#: 92,80 €)
Available now!

There are variations of this item. Please select the variation you wish.


WT-DIRECT Einteiger Set Gross Tier Design
for water transfer printing Contents: 1 x activator 1 x spray can lacquer 1 x primer 1 x 2 K clear coat 1 x WTD film 5 meters 1 x cutter knife 1 x work instruction 1 x sanding fleece 1 x gloves

Processing information:
The water in the pool should have a temperature of 25 - 27 ° C, the soaking time is 60 seconds, there are 2 variants before the film is placed in the water with cuts at an angle of 45 ° at a distance of 2-3 cm at the end after the soaking time of 60 seconds, the film is sprayed with activator,
and the component must be immersed in a timely manner. The pre-painting or priming is required for all parts that are not made of ABS plastic.
Product description:
The water transfer printing film is ideal for providing complex parts with a decor / pattern, easy and easy to learn, even without a dipper / machine a coating is possible TOP QUALITY from WT-DIRECT GmbH if you want to order larger quantities simply the number of meters you need in Increase order window.
NOTICE:
The film may look different in the original than in the photo in our shop. A result like on the PAs in the photo can only be achieved if the part to be processed has been pre-painted in the correct RAL color. Our foils / films are wound up on rolls. Starter set.
Average product review

Write your first review and help others with their purchase decision:

Contact
Question on item