Water transfer printing starter set, large graphic design
WT-DIRECT one-step set large graphic designWT-DIRECT Einteiger Set Large graphic design for water transfer printing Contents: 1 x activator 1 x spray can lacquer 1 x primer 1 x 2 K clear lacquer 1 x WTD film 5 meters 1 x cutter knife 1 x work instruction 1 x sanding fleece 1x gloves
The water in the pool should have a temperature of 25 - 27 ° C, the soaking time is 60 seconds, there are 2 variants before the film is placed in the water:
1. Cut around with cuts at an angle of 45 ° at a distance of 2-3 cm at the end of the soaking time ofThe film is sprayed with activator for 60 seconds, and the components must be immersed in a timely manner. Pre-painting or priming is required for all parts that are not made of ABS plastic.
The water transfer printing film is ideal for providing complex parts with a decor / pattern, easy and easy to learn, even without a dipper / machine a coating is possible TOP QUALITY from WT-DIRECT GmbH if you want to order larger quantities simply the number of meters you need in Increase order window.
The film may look different in the original than in the photo in our shop. A result wAs in the photo can only be achieved if the part to be processed has been pre-painted in the correct RAL color. Our foils / films are wound up on rolls. We recommend using our base coat for parts that need to be painted, otherwise liability problems arise. Starter set
Average product review